EME134A-R3, AlertWerks Gateway - Expansion, Dry Contact

Store home > IoT > Wired > Gateways > AlertWerks Gateway - Expansion, Dry Contact

Photo may vary from actual product		AlertWerks Gateway - Expansion, Dry Contact Real-time extensive environment plus video monitoring and alerting system Supports up to 8 plug-and-play sensors. 4 video inputs for surveillance cameras. Various ways of alarm alerts incl. e-mail, SNMP & text messages. Monitor up to 500 intelligent sensors using the expansion modules. Stream video and sensor information directly to your phone or PDA. Monitor up to 80 SNMP devices. Manageable through an easy-to-use Web interface. EME134A-R3: Full SNMPv1 compliance. Fast CPU. Warranty: 5 Year Double Diamond™ Warranty (Standard)

	Product				Code


Expansion Unit
	16 dry contacts	AlertWerks Gateway - Expansion, Dry Contact	EME1DC16
Sensor
	8 sensors + 4 video in	AlertWerks Gateway - Expansion, Dry Contact	EME134A-R3

Accessories

	Product	Code

AlertWerks Power Switch
	AlertWerks Power Switch - Power Switch, 1 port, normally closed, 48 VDC, 1.5m	EME1PDCC-005
AlertWerks DC Voltage Sensor
	AlertWerks DC Voltage Sensor - DC voltage, 0–60 VDC, 1.5m	EME1D1-005-R2
AlertWerks Rope Water Sensor
	Rope Water Sensor Extension - Extension, 3m	EMERWE-010-R2
	Rope Water Sensor - Sensor, 6m	EMERW-020-R2
AlertWerks Dual Temperature/Humidity Sensor Cable
	Temperature and Humidity Sensors for AlertWerks - 30.5 cm	EME1TH1-001-R2
	Temperature and Humidity Sensors for AlertWerks - 1.5m	EME1TH2-005-R2
AlertWerks Power Switch
	AlertWerks Power Switch - Power Switch, 1 port, normally open, 230 VAC, 1.5m	EME1P2O-005
AlertWerks Single Dry-Contact Sensor
	AlertWerks Single Dry-Contact Sensor - 4.5m	EME1K1-015
Intelligent Digital I/O Sensor
	Intelligent Digital I/O Sensor - (8) dry contacts for TB	EME1J8-005
	Intelligent Digital I/O Sensor - (2) RJ-45 to (8) dry contacts	EME1KJ8-005
Intelligent Movement Sensors
	Intelligent Airflow Sensor - Airflow Sensor, 1.5m	EME1F1-005-R2
	Intelligent Motion Dection Sensor - Motion Detection Sensor, 1.5m	EME1M1-005-R2
	Intelligent Security Contact - Magnetic Door Contact, 4.5m	EME1Y1-015
	Intelligent Security Contact - Magnetic Door Contact, 18.2m	EME1Y1-060
Photoelectric Smoke Detector
	Photoelectric Smoke Detector - Smoke detector, 1.5m	EME1S2-005
AlertWerks Water Sensors
	AlertWerks Water Sensors - 4.5m	EME1W1-015
AlertWerks II Siren and Strobe Light
	AlertWerks II Siren and Strobe Light - 1.5m, Siren and strobe light	EME1SS-005
AlertWerks AC Voltage Sensor
	AlertWerks AC Voltage Sensor - AC Voltage, 50–250 VAC, 1.5m	EME1A1-005
AlertWerks Rackmount DIN-Rail Bracket
	Single 1U DIN Rail Rackmount kit	EMEDIN
	AlertWerks Rackmount DIN-Rail Bracket - Dual, 1U	EMEDRMK
	Split 1U DIN Rail Rackmount kit	EMESDIN
	DIN rail mounting brackets for sensors	EMESMB

In-depth info Technical data Diagrams/Videos Package content

Documentation

The AlertWerks II ServSensor V4E enables you to integrate environmental sensors and surveillance cameras into one seamless remote monitoring system that watches over your premises. Use it to monitor data centres, offices, or anywhere it's important to keep an eye on conditions on the ground.

Plug-and play Sensor Integration
Plug up to 8 (eight) Intelligent Sensors into the RJ-45 ports of the ServSensor V4E. Sensors automatically configure and go on-line, ready to report any status change. Choose from a wide variety of sensors, including temperature, humidity, water, airflow, motion, and voltage.

Use the two expansion ports on the front of the ServSensor V4E to add even more ports with the ServSensor V4E Expansion Units. The ServSensor EXP8 (EME1X8) provides additional ports for eight Intelligent Sensors; the ServSensor EXPDC16 (EME1DC16) provides 16 dry contacts.

Video Surveillance
The ServSensor V4E supports up to four ServSensor PT Dome Cameras. You can also use it with a wide range of analogue cameras like your existing security cameras, sophisticated night-vision cameras, outdoor cameras, or low-cost CCTV cameras.

The ServSensor V4E supports video of up to 640 x 480 dpi from up to four cameras. Set it to scan between cameras or show all cameras at once. It has enough memory to store up to 2320 pictures. A built-in 4-port Pelco-D-compatible pan/tilt controller eliminates the need for expensive additional controllers and enables you to move and zoom cameras from the Web interface.

Data from Graphical Interface
The ServSensor V4E gathers and displays sensor data in its easy-to-use, Web-based user interface. It automatically generates day, week, month, and year graphs for each sensor. The data can be downloaded in a text file for external processing or remotely polled and saved automatically to a PC.

Notification Wizard
The Notification Wizard enables the ServSensor V4E to notify you of changes in sensor status in real time. Configure each notification by choosing a sensor, selecting the alarm condition, and defining what to do when the alarm is triggered. You can choose to be notified in a variety of ways: audible alarm, SNMP trap, e-mail, e-mail with attached picture, text message to your phone, or fax.

For instance, you can have the ServSensor V4E text you when it detects that the door of a server cabinet is opened or e-mail everyone on your IT staff whenever the temperature in your data centre goes over 30° C.

False Message Filter
To prevent false alarms, ServSensor V4E allows extensive filtering of events. You can limit events based on the time of day or the day of the week. You can also limit the number of alerts per hour, so that you are not swamped with messages. This is especially important with a sensor like the motion detector where you may want to process an event only when the business premises are closed.

Automatic emergency shut down
Linux® devices will automatically send a shutdown message to your Linux or Windows® based servers. So if there is a power outage, for example, you can rest assured that your servers will be safely and automatically shut down before your UPS runs out.